Items where Subject is "Engineering"

Group by: Creators | Item Type
Jump to: A | B | C | D | E | G | H | I | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items at this level: 65.

A

Afonin, S. M. (2022) Structural-Parametric Model of Electromagnetoelastic Actuator for Nanoscience and Nanotechnology. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 116-129. ISBN 978-93-5547-618-0

Akinola, Oluwaseun Ibrahim and Olaniyi, Oluwaseun Oladeji and Ogungbemi, Olumide Samuel and Oladoyinbo, Oluseun Babatunde and Olisa, Anthony Obulor (2024) Resilience and Recovery Mechanisms for Software-Defined Networking (SDN) and Cloud Networks. Journal of Engineering Research and Reports, 26 (8). pp. 112-134. ISSN 2582-2926

Al-Othmany, Dheya (2022) Determination of Flow Accelerated Corrosion (FAC) in Feeder Pipes Using CFDd Software Fluent. In: Techniques and Innovation in Engineering Research Vol. 1. B P International, pp. 90-96. ISBN 978-93-5547-842-9

Alluri, Lakshmaiah and Bhaskar, M. and Magadam, Hemant Jeeven (2021) Performance Evaluation of RISC-V Architecture. In: Advanced Aspects of Engineering Research Vol. 13. B P International, pp. 83-94. ISBN 978-93-91215-49-1

Areola, R. I. and Aluko, O. A. and Dare-Adeniran, O. I. (2023) Modelling of Adaptive Neuro-fuzzy Inference System (ANFIS) - Based Maximum Power Point Tracking (MPPT) Controller for a Solar Photovoltaic System. Journal of Engineering Research and Reports, 25 (9). pp. 57-69. ISSN 2582-2926

Aziz, Tahmineh (2022) Study on the Application of the Fractional Calculus in Pharmacokinetic Modeling. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 52-70. ISBN 978-93-5547-686-9

Azizi, Tahmineh and Mugabii, Robert (2022) Neuronal Spiking Patterns of Fractional-order Morris-Lecar Model. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 1-27. ISBN 978-93-5547-686-9

B

Baswaraj, D and Murthy, P V Krishna and Lakshmi, K Prasanna (2024) Experimental Investigation on Combustion Characteristics of LHR and Conventional Engines Using Tobacco and Cotton Seed Methyl Ester Blend. Journal of Engineering Research and Reports, 26 (11). pp. 274-285. ISSN 2582-2926

Bharathi, V. and Arunachalam, M. (2021) A Detailed Analysis of Microgrids. In: Advanced Aspects of Engineering Research Vol. 13. B P International, pp. 95-107. ISBN 978-93-91215-49-1

Braide, S. L. (2022) Evaluation and Analysis of Least Square and Exponential Regression Techniques for Consumer Energy Consumption Requirement. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 130-184. ISBN 978-93-5547-618-0

C

Chanagala, Satyanarayana and Sai, M. Srinivasa Sesha and Talakola, Srirammurthy and Watkar, Prashant Shamrao and Durge, Shubham Kailash (2022) Analysis and Information Extraction Through the Data Generated by LISS-III Sensor of IRS-P6. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 82-90. ISBN 978-93-5547-391-2

Chisale, Sylvester William and Sari, Zaki (2021) Design of Stand-alone Solar-Wind-Hydro Based Hybrid Power System: Case of Rural Village in Malawi. In: Advanced Aspects of Engineering Research Vol. 4. B P International, pp. 139-155. ISBN 978-93-90888-06-1

Coufal, Oldrich (2022) Study on Resistance and Inductance of Solid Conductors. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 71-96. ISBN 978-93-5547-686-9

Cui, Xinjun (2022) A Perspective of Shock Waves for Gasdynamical and Granular Flows. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 91-97. ISBN 978-93-5547-391-2

D

Dave, Rohil J and Min, Xue and Lou, Zhiyuan and Stewart, Rebecca (2024) Investigating Construction and Integration Techniques of Dry Silver-Based Textile Electrodes on Electromyography of Biceps Brachii Muscle. E-Textiles 2023. p. 21.

Dutta, Anirban and Chatterjee, Biswapati (2022) Study of Influences of the Process Parameters and Development of Empirical Prediction Model through Linear Multiple Regression for the Longitudinal Stiffness of Embroidered Textile Fabric. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 31-59. ISBN 978-93-5547-391-2

E

Emmanuel, Obolo Olupitan (2019) The Working Principle of a Turbine “Case Study: GE Frame 9E Gas Turbine”. Journal of Engineering Research and Reports, 9 (1). pp. 1-20. ISSN 2582-2926

G

Gadolina, I. (2021) The Use of Spectral Methods for Assessing Durability at Post-processing Stage Requires Justification. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 19-29. ISBN 978-93-90888-10-8

Gorlenko, N. P. and Sarkisov, Yu S. and Syryamkin, V. I. and Naumova, L. B. and Pavlova, A. N. and Laptev, B. I. (2021) Study on Wave Mechanism of Structure Formation in Cement Compositions. In: Novel Perspectives of Engineering Research Vol. 1. B P International, pp. 29-37. ISBN 978-93-5547-166-6

H

Herrera-Cobo, Juan Sebastián and Escobar, John Willmer and Álvarez-Martínez, David (2023) Metaheuristic algorithm for the location, routing and packing problem in the collection of recyclable waste. International Journal of Industrial Engineering Computations, 14 (1). pp. 157-172. ISSN 19232926

Hora, M. S. and Tiwari, H. L. and Bhagat, Yoshika (2022) Seismic Performance Evaluation of Residential Cum Commercial Infilled Building. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 194-219. ISBN 978-93-5547-618-0

I

Ibrahim, Marzuki and Omar, M. Hisham and Abdullah, Imran and Ahmad, M. Sophist and Yusoff, S. A. Tajuddin Sh. (2020) Rekindling the Glory of Islamic Scholar Inventions through Next Generation Worshipping Product Innovations. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 67-85. ISBN 978-93-90149-36-0

Irshad, Zeeshan (2019) How Effectively Value Engineering Practices are Being Implemented in Qatar on Infrastructure Projects. Journal of Engineering Research and Reports, 9 (1). pp. 1-8. ISSN 2582-2926

Ishaque, Fahmida and Hossain, Md. Altaf and Sarker, Md. Abdur Rashid and Mia, Md. Yunus and Dhrubo, Atik Shahriar and Uddin, Gazi Tamiz and Rahman, Md. Hafizur (2019) A Study on Low Cost Post Harvest Storage Techniques to Extend the Shelf Life of Citrus Fruits and Vegetables. Journal of Engineering Research and Reports, 9 (1). pp. 1-17. ISSN 2582-2926

K

Khan, G. and Kazi, S. N. and Syed, M. A. and Nasar, S. and Kakar, A. (2021) Comparative Analysis of Heat Transfer Coefficient for Wood and Non-wood Pulp Fiber: A Recent Study. In: Advanced Aspects of Engineering Research Vol. 9. B P International, pp. 192-197. ISBN 978-93-90888-79-5

Khan, Shaikhul Arefin and Chowdhury, Md. Mokarram Hossain and Nandy, Uthso (2023) LTE/LTE-A Based Advanced Wireless Networks. Journal of Engineering Research and Reports, 25 (10). pp. 195-199. ISSN 2582-2926

Kumar, S. and Vijayakumar, S .D. and Praveenkumar, R. and Manimala, V. (2022) Developing an Efficient Hybrid Approach for Email Spam Filtering: SPAM-NSGA-II-NvBys. In: Techniques and Innovation in Engineering Research Vol. 1. B P International, pp. 164-179. ISBN 978-93-5547-842-9

L

Loganina, Valentina (2021) Research on Durability of Paint and Varnish Coatings Depending on the Quality of Their Appearance. In: Advanced Aspects of Engineering Research Vol. 4. B P International, pp. 132-138. ISBN 978-93-90888-06-1

M

Machiraju, Aditya Seshu and Krishna, M. V. S. Murali and Ushasri, P. (2022) Combustion Characteristics of a Semi-Adiabatic Diesel Engine with Plastic Oil with Supercharging. In: Techniques and Innovation in Engineering Research Vol. 1. B P International, pp. 146-163. ISBN 978-93-5547-842-9

Maksi, L. and Berryman, S. and Brio, A. and Burkhardt, A. and Elder, S. and Ferkau, S. and Gharbiah, H. and Lynch, K. and Risch, Q. (2021) Study on Deriving Common Factory Test Platform Requirements Using Historical Test Data. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 38-49. ISBN 978-93-90888-10-8

Marsudi, . and Trisilowati, . and Suryanto, Agus and Darti, Isnani (2021) Optimal Control of an HIV Model with Education Campaign, Screening and Treatment. In: Advanced Aspects of Engineering Research Vol. 13. B P International, pp. 57-71. ISBN 978-93-91215-49-1

Martin, Nivetha (2021) Multi-Step FCM Approach in Exploring the Strategies of Mitigating the Fear of Mathematics among the Engineering Students. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 30-37. ISBN 978-93-90888-10-8

Mathew, Alex R. (2022) Threats and Protection on E-sim: A Prospective Study. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 76-81. ISBN 978-93-5547-391-2

Mishra, K. K. (2021) Study on Soft Phonons and Mode Grüneisen Parameters in a Framework Material H3[Co(CN)6]. In: Novel Perspectives of Engineering Research Vol. 1. B P International, pp. 22-28. ISBN 978-93-5547-166-6

Mohammed, Ayman and Hasnain, Syed Ali and Quadir, Abdul (2019) Implementation of Building Information Modelling (BIM) Practices and Challenges in Construction Industry in Qatar. Journal of Engineering Research and Reports, 9 (1). pp. 1-9. ISSN 2582-2926

Moore, Edward and Udom, Godwin and Ngobiri, Nnaemeka and Osuji, Leo (2019) Engineered Sewage Treatment System in Selected Niger Delta Environment. Journal of Engineering Research and Reports, 9 (1). pp. 1-13. ISSN 2582-2926

N

Narayana, R. Lakshmi and Raju, K. Nagabhushan (2022) IoT Enabled Stepper Motor Control for Industrial Automation Applications. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 104-115. ISBN 978-93-5547-618-0

O

Ogungbemi, Olumide Samuel and Ezeugwa, Favour Amarachi and Olaniyi, Oluwaseun Oladeji and Akinola, Oluwaseun Ibrahim and Oladoyinbo, Oluseun Babatunde (2024) Overcoming Remote Workforce Cyber Threats: A Comprehensive Ransomware and Bot Net Defense Strategy Utilizing VPN Networks. Journal of Engineering Research and Reports, 26 (8). pp. 161-184. ISSN 2582-2926

Ouedraogo, Drissa and Igo, Serge Wendsida and Compaore, Abdoulaye and Sawadogo, Gaël Lassina and Zeghmati, Belkacem and Chesneau, Xavier (2020) Experimental Study of a Metallic Pressure Cooker Insulated with Kapok Wool. Energy and Power Engineering, 12 (02). pp. 73-87. ISSN 1949-243X

P

Pandipati, Babu and Sam, R. Praveen (2020) Speaker Identification Using Machine Learning: Advanced Study. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 27-32. ISBN 978-93-90149-36-0

Pathak, Aniket and Fernandez, Wilfred and Mistry, Hit and Oommen, Nithin and Dabla, Ravi (2021) Automatic Book Rack System with Expandable Clasp Holder: A Short Review. In: Advanced Aspects of Engineering Research Vol. 4. B P International, pp. 156-163. ISBN 978-93-90888-06-1

Petrosyants, Konstantin O. and Ryabov, Nikita I. (2024) Quasi-3D Thermal Modelling of Advanced Electronic Systems in Package. In: Theory and Applications of Engineering Research Vol. 3. B P International, pp. 120-156. ISBN 978-81-969435-5-4

Priyadarshini, S. Hema and Dutt, D. Narayana and Rajan, Anand Prem (2020) Recurrence Quantification Analysis of Wrist Pulse Signals to Distinguish Diabetic and Non-diabetic Subjects. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 33-43. ISBN 978-93-90149-36-0

Q

Qian, Shilei (2023) A Review Study on Performance Improvement of Coal Gangue as Coarse Aggregate in Concrete. Journal of Engineering Research and Reports, 25 (11). pp. 142-148. ISSN 2582-2926

R

Ragini, Ch. Suvarna (2020) Do Horoscopes Influence the Process of Language Learning? A Model-Based Research Report Theme: Astronomy Scientific Findings. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 58-66. ISBN 978-93-90149-36-0

Raharjo, Wahyu Purwo and Ariawan, Dody and Diharjo, Kuncoro and Raharjo, Wijang Wisnu and Kusharjanta, Bambang (2022) Weathering Degradation of Polyolefin. In: Techniques and Innovation in Engineering Research Vol. 1. Book Publisher International (a part of SCIENCEDOMAIN International), pp. 97-145. ISBN 978-93-5547-842-9

S

Safi, Md. and Chowdhury, Shawon and Shahabuddin, Gazi Md. (2023) Resources Diversification in Bangladesh’s Electricity Generation: A Study on the Role of Renewable Energy Sources. Journal of Engineering Research and Reports, 25 (3). pp. 26-35. ISSN 2582-2926

Salmasi, Farzin and Abraham, John (2021) Study on the Effect of Inclination of Cutoff Wall Beneath Gravity Dams on Uplift Force. In: Novel Perspectives of Engineering Research Vol. 1. B P International, pp. 38-57. ISBN 978-93-5547-166-6

Serebryanaya, Valentine and Shevchuk, Irina (2021) Mosaic as an Element of the Synthesis of Architecture and Monumental Art in the Architecture of Volgograd and Volzhsky: An Advanced Research. In: Novel Perspectives of Engineering Research Vol. 1. B P International, pp. 76-85. ISBN 978-93-5547-166-6

Shalaby, M. S. and El-Sherbini, Shakinaz A. and Ramadan, Rania and El-Rafie, Shadia A. and Sibak, Hanem A. (2021) Studies on Environmental Friendlier Magnesium Fuel from Liquid Waste Bittern. In: Advanced Aspects of Engineering Research Vol. 13. B P International, pp. 72-82. ISBN 978-93-91215-49-1

Sheikh, Protik Parvez and Riyad, Tarifuzzaman and Tushar, Bezon Dey and Alam, Sadman Shahriar and Shufian, Abu and Ruddra, Istiaq Mahmood (2024) Thyristor-based Rechargeable Battery Charger. Journal of Engineering Research and Reports, 26 (3). pp. 104-112. ISSN 2582-2926

Shukla, SachchidaNand and Soni, Pratima and Srivastava, Geetika (2021) Low-frequency Small-signal Amplifier with BJT-JFET Hybrid Unit in Sziklai Pair Topology. In: Advanced Aspects of Engineering Research Vol. 13. B P International, pp. 108-122. ISBN 978-93-91215-49-1

T

Tang, Enmin and Ding, Jing and Lu, Jianfeng (2020) Heat Transfer and Energy Utilization of Waste Heat Recovery Device with Different Internal Component. Energy and Power Engineering, 12 (02). pp. 88-100. ISSN 1949-243X

Tebo, Emmanuel-Peters Teke and Masu, Leonard and Nziu, Patrick (2021) Effects of Factors That Influence Out-of-Plane Lateral-Torsional Buckling on Freestanding Circular Arches-A Brief Review. In: Advanced Aspects of Engineering Research Vol. 6. B P International, pp. 1-18. ISBN 978-93-90888-10-8

U

Udo, Essien (2021) Composite Stabilization and Model Prediction of Geotechnical Parameters of Lateritic Soils within the Coastal Plains of Akwa Ibom State, Nigeria. In: Novel Perspectives of Engineering Research Vol. 1. B P International, pp. 58-75. ISBN 978-93-5547-166-6

Uparkar, Satyajit S. and Vaidya, Nalini V. and Lokhande, Kalpana G. and Golar, Priti C. (2020) Application of Data Analytics in Building a Game Theory Model for Social Networking Sites. In: Emerging Trends in Engineering Research and Technology Vol. 7. B P International, pp. 58-66. ISBN 978-93-90149-36-0

V

Verma, Sanjeev Kumar and Bhadauria, Sudhir Singh and Akhtar, Saleem (2022) Determining Residual Service Life of Concrete Structures Based on Experimental Data. In: Technological Innovation in Engineering Research Vol. 6. B P International, pp. 185-193. ISBN 978-93-5547-618-0

W

Wang, Qingzheng and Li, Bin and Zhu, Xixi (2024) Multi-feature Learning Adaptive Network for Underwater Image Enhancement. Journal of Engineering Research and Reports, 26 (5). pp. 66-75. ISSN 2582-2926

Wang, Yarong and Ding, Jing and Lu, Jianfeng (2020) Numerical Study of Methane Dry Reforming Reaction in a Disk Reactor with Focused Solar Simulator. Energy and Power Engineering, 12 (02). pp. 59-72. ISSN 1949-243X

Woo, Seongwoo and O’Neal, Dennis L. and Hassen, Yimer Mohammed (2022) Study on Reliability Design of Mechanical Systems Such as Compressor Subjected to Repetitive Stresses. In: Technological Innovation in Engineering Research Vol. 2. B P International, pp. 28-51. ISBN 978-93-5547-686-9

Y

Yahya, Musa Shuaib and Muhammad, Bilyamin and Abubakar, Mohammed Ahmed and Abdullahi, Usman Ismail and Musa, Zainab Ishaq (2023) Implementation of a Real-Time IoT Based Energy Management System. Journal of Engineering Research and Reports, 25 (10). pp. 19-29. ISSN 2582-2926

Yang, Bing (2022) Failure Characteristics and Mechanism of Double-Sided Slopes in Seismic Load. In: Novel Perspectives of Engineering Research Vol. 8. B P International, pp. 60-75. ISBN 978-93-5547-391-2

Z

Zhang, Fan and Xing, Meibo and Tang, Wentao and Wang, Ruixiang (2020) A Compound Cycle for Power Generation by Utilizing Residual Heat of Flue Gas in Electric Steelmaking Process. Energy and Power Engineering, 12 (02). pp. 45-58. ISSN 1949-243X

Zhang, Xiaotao and Gondal, Hussain Ahmad Madni and Duan, Foyuan and Zhang, Weidong and Mu, Haoliang and Zhang, Chengyu and Wang, Aijun (2020) Numerical Study on NOx Emissions of Methane Re-Combustion in a 600 MWe Coal-Fired Boiler. Energy and Power Engineering, 12 (03). pp. 101-107. ISSN 1949-243X

Zhang, Yun and Li, Shanpeng and Zuo, Pingcheng and Xu, Xiangling and Li, Jing and Liu, Jianlin (2021) Adhesion Behaviors of Abalone Under the Action of Water Flow. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

This list was generated on Sun Dec 22 08:09:06 2024 UTC.